Water that flows across the surface of your yard can cause significant damage if it's flowing toward the house instead of away. Surface drainage solutions — including regrading, swale construction, and berm installation — redirect that flow so it exits the property without threatening the foundation or creating erosion problems.

Keller sits on the northern edge of Fort Worth in Tarrant County, a former agricultural community — it was a significant grain-shipping point along the old Cotton Belt Railroad — that transformed into one of the DFW Metroplex's more affluent suburbs largely from the 1980s onward. The overwhelming majority of Keller's housing stock is newer slab-built subdivisions reflecting that recent growth, built on the same expansive blackland-to-grayland prairie clay found throughout North Texas, though Tarrant County's soil composition runs slightly more variable than the deep uniform clay on the Dallas side of the Metroplex given its position closer to the Eagle Ford outcrop. Keller's higher household incomes and newer housing stock shift the local drainage market toward proactive correction and French drain installation ahead of visible problems, rather than the deferred, reactive repairs more common in older North Texas neighborhoods. Keller's Bear Creek corridor running through parts of the city is one of the few natural drainage channels still largely intact amid the surrounding subdivisions.

Regrading and Swales

Many drainage problems are the result of incorrect grading — either from original construction, soil settlement, or landscaping that has changed the surface contours over time. We connect you with contractors who regrade problem areas to restore positive drainage away from the home. In some cases, a swale — a shallow, vegetated channel — is the right solution for directing concentrated flow across the property safely. Correct grade is a small number that matters a lot: a slope of even a few percent away from the foundation over the first several feet is usually enough to keep water moving in the right direction, but a yard that's flat or, worse, sloping the wrong way needs real regrading, not just a cosmetic fix.

  • Regrading near the foundation — restoring positive slope away from the house over the first 6-10 feet, the single highest-impact surface fix on most properties.
  • Swale construction — a shallow, vegetated channel that carries concentrated flow safely to a discharge point without underground pipe.
  • Berms — low earthen ridges that redirect water around a structure or feature rather than through it.
  • Re-establishing lost grade — common on older properties where years of landscaping, mulch buildup, or soil settling have quietly erased the original drainage slope.

What Surface Drainage Can and Can't Solve

Surface drainage works well when the problem is water running across the yard toward the house. It's less effective for subsurface water that rises from below or migrates through the soil. In those cases, surface drainage is often combined with french drains or catch basins. A provider assesses the full drainage picture before recommending any single solution. A simple way to tell which type of problem you likely have: surface issues usually show up quickly during a storm, with visible flow you can watch happen, while subsurface issues tend to show up later, as dampness or pooling that appears well after the rain has stopped.

  • Solves well: water visibly flowing across the yard toward the house during rain.
  • Solves well: erosion channels or bare dirt paths where surface runoff repeatedly follows the same route.
  • Doesn't solve alone: dampness or pooling that appears hours after rain has stopped, more likely subsurface.
  • Doesn't solve alone: water reaching a basement or crawl space from below rather than over the surface.

Have Questions?

We're happy to discuss what you're dealing with before you commit to anything. Call us and we'll tell you what's likely causing it.

Call (469) 501-9927

This content is reviewed by the Texas Drainage Solutions editorial team and informed by licensed-contractor sourcing, manufacturer documentation, and established industry standards for Drainage. Read our editorial standards.